KENNEDY CRAFT RENOVATION
BY DAVID SHEPHERD
This Customer wanted to remove the bench seats to have more walking around room on top for fishing
Step 2 the seats are removed and the interior is sanded, filled, fared, primed and painted, Non-skid areas coated in beige
Step 3 the stringers are glassed in for support of the enclosures that will create an enclosed topside for this hull
Step 1
The boat arrives in it's dilapidated condition
Step 3
The hull sides and transom are sanded, filled, fared
Step 4
The finished interior is protected and the Hull topside is fabricated with marine grade
plywood and fiberglass
* note the prepared transom and hullsides are protected prior to beginning glass work
Step 5
The boat is turned over and supported by
boat level set stands. At this point the hull is sanded, filled, fared, primed and painted.
Step 6
A second color was added to the hull sides.
Step 8 Refurbished storage lids are installed and
boat is ready for pickup by customer!
* If you doubt this transformation is amazing go back and look at step one!
Step 7
After allowing the hull paint to cure the boat is turned over and placed on the trailer. Hardware is reinstalled.